Problems to compile Yampp_Pioneer v2.2

[Anonymous]

Hi,

when i want to compile the sources, i get the following output:
[code:1]
-------- begin --------
avr-gcc -c -mmcu=atmega162 -I. -g -Os -funsigned-char -funsigned-bitfields -fpac
k-struct -fshort-enums -Wall -Wstrict-prototypes -Wa,-ahlms=yampp3.lst yampp3.c
-o yampp3.o
yampp3.c: In function `main':
yampp3.c:189: error: `PE2' undeclared (first use in this function)
yampp3.c:189: error: (Each undeclared identifier is reported only once
yampp3.c:189: error: for each function it appears in.)
make: *** [yampp3.o] Error 1
-------- end ----------[/code:1]

Any idea, whatґs the error?

thanks,
sebastian

[Sergey]

change PE2 on 2 or PINE2(PORTE2)
On Mega162  PE1 use for SUART, PE2  undefined

[Vitat]

Code is writing for yampp3 versions with AT90S8515 or ATMega161. I have not ATMega162 now. So, I can not adapt and testing code with ATMega162.
Some specific definitions in Mega161 and Mega162 are different. Like this:
Mega162 PORTE bit definitions
PORTE2 2
PORTE1 1
PORTE0 0
Mega161 PORTE bit definitions
PE2 2
PE1 1
PE0 0

[Vitat]

You can compile code for ATMega161. And you need set Mega161 compatibility fuse in mega162 CPU.
Set fuse bits like this:

I think, it must working.

[sebastian]

Hi!

Thanks for your Answers!
The first Problem seems to be solved.

But now I get another Error-Message:

[code:1]
-------- begin --------
avr-gcc -c -mmcu=atmega162 -I. -g -Os -funsigned-char -funsigned-bitfields -fpac
k-struct -fshort-enums -Wall -Wstrict-prototypes -Wa,-ahlms=yampp3.lst yampp3.c
-o yampp3.o
avr-gcc -c -mmcu=atmega162 -I. -g -Os -funsigned-char -funsigned-bitfields -fpac
k-struct -fshort-enums -Wall -Wstrict-prototypes -Wa,-ahlms=fat.lst fat.c -o fat
.o
avr-gcc -c -mmcu=atmega162 -I. -g -Os -funsigned-char -funsigned-bitfields -fpac
k-struct -fshort-enums -Wall -Wstrict-prototypes -Wa,-ahlms=ata_if.lst ata_if.c
-o ata_if.o
avr-gcc -c -mmcu=atmega162 -I. -g -Os -funsigned-char -funsigned-bitfields -fpac
k-struct -fshort-enums -Wall -Wstrict-prototypes -Wa,-ahlms=delay.lst delay.c -o
 delay.o
avr-gcc -c -mmcu=atmega162 -I. -g -Os -funsigned-char -funsigned-bitfields -fpac
k-struct -fshort-enums -Wall -Wstrict-prototypes -Wa,-ahlms=uart.lst uart.c -o u
art.o
uart.c: In function `UART_Init':
uart.c:77: error: `RXCIE' undeclared (first use in this function)
uart.c:77: error: (Each undeclared identifier is reported only once
uart.c:77: error: for each function it appears in.)
uart.c:77: error: `RXEN' undeclared (first use in this function)
uart.c:77: error: `TXEN' undeclared (first use in this function)
uart.c:79: error: `UBRRH' undeclared (first use in this function)
uart.c:81: error: `UBRR0' undeclared (first use in this function)
uart.c: In function `UART_SendByte':
uart.c:154: error: `UDRE' undeclared (first use in this function)
make: *** [uart.o] Error 1
[/code:1]

[Vitat]

Look in to \WinAVR\avr\incluide\avr\iom161.h and \iom162.h and find the differents.