IPbus audio connector?

[spumanti]

Hi all!

This is my first post here!  

Can I just hook my yampp directly up to the Car radio (Pioneer DEH-P4100R) using the IPbus?
-Using Pin 7 (audio left), 9 (audio right), 10 and 11 (GND).
I know i can't control the Yampp from the radio, but i'm only interested in getting the audio through now. Will it work?

Sincerely David Keis

[spumanti]

Oh... by the way...  

Where to buy a IPbus connector, so I don't have to solder directly on the car radio....???  

                           

 

[Vitat]

Hi all!

This is my first post here!  

Can I just hook my yampp directly up to the Car radio (Pioneer DEH-P4100R) using the IPbus?
-Using Pin 7 (audio left), 9 (audio right), 10 and 11 (GND).
I know i can't control the Yampp from the radio, but i'm only interested in getting the audio through now. Will it work?

Sincerely David Keis

It will work if you can activate AUX in radio options.
Where to bye IP-Bus connector - I don't know.

[spumanti]

OK, Thanks Vitat!

I already turned on the AUX interface in my radio!    Still looking for a IPbus connector (using micro crimp connectors just now!)

Another question:
Normally it is not good to leave digital inputs not connected to anything    Do i need to tie it to GND, or anything? Maybe with a 10K resistor?

I dont' know -it was just a thought!  

[Vitat]

Another question:
Normally it is not good to leave digital inputs not connected to anything    Do i need to tie it to GND, or anything? Maybe with a 10K resistor?

Not needed!

[spumanti]

OK.